memdiag TAP¶

Introduction¶

This is a tiny Topfield TMS TAP to output free memory statistics every 60 secs to the PVR diagnostics/debug port.

Read the latest documentation or download the latest built TAP.

Installation and usage¶

To install the TAP, upload it to the ProgramFiles/AutoStart folder on your PVR using ftp then start it manually or restart your PVR (or copy it via a USB flash stick). There is no configuration or user interaction required for this tap. It merely runs in the background and outputs the PVR TAP_MemInfo() statistics every 60 secs, if they change.

To see and/or capture the diagnostics, telnet to port 21 on your PVR from your PC as follows, and type the following commands (as appropriate for your PVR):

telnet 192.168.1.77 21
user guest
pass 0000
tap debug on

Author¶

• User bulletmark on the oztoppy Australia Forum.
• User bulletmark on github.

License¶

Copyright (C) 2012 Mark Blakeney.

This program is free software. and is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

Change History¶